Promate | Electronic Distribution | Contact Us
EMBEDDED SYSTEM BOARD
Display & Embedded Solutions
Display Solutions
Open Frame
Open Frame Touchmonitor
Specialized Monitor
Enhanced Display
Driving Boards & Accessories
Embedded System
System on Module
Embedded System Board
Embedded Panel
Intelligent Ethernet I/O
Services
Technical Capabilities
Software Engineering
Optical Engineering
Mechanical Engineering
Electrical Engineering
Core Competence
Management Systems
Quality Management
Certificates and Standard
Reliability Lab Capability
Custom Solutions
Support
RMA System
FAQ
Contact Us
Home > Display & Embedded Solutions > Embedded System > Embedded System Board > Whitney

Whitney

Multipurpose Industrial Embedded Platform
Features
* Low-Cost/Low Power/Fan-less
* Win CE 6.0/Linux BSP Support
* Touch Panel Total Solution
* Supports QVGA to SVGA
* LED Backlight Driver
* Power over Ethernet
* Wide Input Voltage Range

Target Applications
Home Automation, Vending Machines, Portable Instruments, Marine HMI, Medical Instruments, Bedside Monitor
Specifitations
General CPU Freescale i.Mx27(ARM926EJ-S 32bit 400Mhz Core)
16 KB L1 I-Cache and D-Cache
Volatile Memory 128MB DDR266 SDRAM
Non-Volatile Memory 32MB NOR Flash, 256MB NAND Flash Optional
Storage 1 x MS/SD, 1 x CF Slots, 1 x IDE ATA
Display LCD Interface 18it TTL / 1Ch LVDS alternate, Digital RGB for 7inch C070VW02
Supported Resolution Up to SVGA (800 x 600)
Backlight Onboard PWM LED Driver
Video Video Interface NTSC / PAL CCIR656 Interface (Alternate with Camera Interface)
Encoder/Decoder MPEG4 / H.264 Hardware CODEC Accelerator
Camera Interface 640 x 480 CMOS Camera Interface (Alternate with Video Interface)
I/O Ethernet 1 x 10/100 Base-T Fast Ethernet, 1 x Wi-Fi Optional
USB 2.0 1 x USB 2.0 (Host), 1 x USB 2.0 (OTG)
Serial 1 x RS232/ 3 x UART (Alternate), 1 x RS422/485, 1 x IrDA, 1 x I2C (In camera/video interface)
Audio 1 x Stereo MIC/Line In, 2 x 2 Watt Stereo Class D Speaker Out
Human Machine Interface 1 x Up to 6 x 6 Keypad, 1 x 4Pin FFC Connector + 2 x 4 Pin Header
JTAG 1 x Connector (Debug Interface)
Power Source 5VDC +/-10%
Battery Power Source 3.2V ~ 4.2VDC 1 cell Li-on Battery
PoE Power over Ethernet Board
Alternate Input 8VDC ~ 32VDC (Supported by Power Daughter Board)
OS WinCE Win CE 6.0
Linux Linux BSP Customization Support

* Specifications are subject to change for improvement without prior notice.

Documentation Downloads

Download 1 Page Brief (PDF file)
Address: 4F, No. 32, Section 1, Huan Shan Road., Nei Hu District, Taipei 11442, Taiwan Tel : + 886 - 2 - 2659 - 0303
Copyright 2004-2009 Promate Electronic Co., Ltd. All Rights Reserved